Classified Section
If you have an item you would like to feature in this section, please send the following information to Bill Michell at nrmfcwebeditor@gmail.com
- detailed description of the item
- asking price
- photo(s)
- contact information
Please contact Bill Michell at nrmfcwebeditor@gmail.com to have your item removed once it has sold.
Click on photos to expand.
1/4 Scale Spacewalker
$500
Contact: John Snowdon at 905-227-4525 905-227-4525 ?
Custom built, 1/4 scale Spacewalker, Fabric covered,with rib stitching and considerable scale detail. Includes a Zenoah G26 with a new carb kit and Zoar propeller , Futaba servos throughout.
Wanted: Reciever for E-flite Vapor
Contact: Ron Campbell oldflyguy@cogeco.ca
|
I am looking for a receiver to fit a VAPOR. I had an old one that was given to me and I have rebuilt it. The body has been repaired and I have recovered all the surfaces with plastic using a plastic produce bag from the grocery store. I thought I had an extra receiver but it does not work. I have had some limited success with repairing them especially if there are problems with the servos as they are easily replaced. I have some spare parts. I will even take receivers that don't work and I will try to repair them. Will trade or buy or whatever.
|
E-FLITE PT-17
$250 obo
Contact: oscy@sympatico.ca
From Owner: It came with an electric 25 size motor and controller, all included ...ready to fly...needs cg checked. includes all servos included...ready to go ...44 inch wing span...no hanger rash...mint. don't know what size battery needed as it never was flown
CUB RC AIRPLANE with FLOATS
$400 obo
Please contact Brian at brianpacker_4@hotmail.com
Futaba servos, Floats, OS 72 4-stroke engine
ALIGN TREX 600 NITRO HELICOPTER
$550 firm
Please contact Brian at brianpacker_4@hotmail.com
Bind and fly , IKON 2 Flybarless Controller, OS 55hz with power boost pipe,
Rotor head is upgraded
Just rebuilt motor with brand new piston with rings, connecting rod and bearings front and back
Brand new batteries just bought last year
Comes with everything in the picture including the starting wand and spare parts
Rotor head is upgraded
Just rebuilt motor with brand new piston with rings, connecting rod and bearings front and back
Brand new batteries just bought last year
Comes with everything in the picture including the starting wand and spare parts
ULTIMATE BIPLANE
$100 obo
Please contact Dave at 905-937-0270
43" wingspan, Servos, Cowling
No motor or receiver
|
|
BUD NOSEN CESSNA 310 TWIN - Partially Built
$250 Firm
Please contact Rob Lees at 905-246-6168
Fuselage and one piece wing including flying surfaces. No hinges fitted.
120" wing span. Tip tanks and engine cowls included (never fitted). No motors, servos or receiver.
Slight damage to one elevator trailing edge and small area of balsa sheeting under wing. Easy fix.
No plans or instructions but there is lots of information on RC forums and videos on YouTube regarding this RC plane.
Finished model weighs around 30 lbs. depending on what equipment you install and it should fly on 2 x 0.60 two strokes or larger.
There are two pictures of other finished 310 models to give you an idea of what the finished model looks like.
120" wing span. Tip tanks and engine cowls included (never fitted). No motors, servos or receiver.
Slight damage to one elevator trailing edge and small area of balsa sheeting under wing. Easy fix.
No plans or instructions but there is lots of information on RC forums and videos on YouTube regarding this RC plane.
Finished model weighs around 30 lbs. depending on what equipment you install and it should fly on 2 x 0.60 two strokes or larger.
There are two pictures of other finished 310 models to give you an idea of what the finished model looks like.
ULTRA STICK
$300
Please contact Clint Green at Cgreenvfx@gmail.com
60" wingspan complete with OS 4-stroke , also includes an extra set of wings.
FUTABA TRANSMITTERS
$300
Please contact Clint Green at Cgreenvfx@gmail.com
